An entry-level machine from TriTech

USE TO SPRAY

  • Emulsion, interior and exterior
  • Top coats
  • Wood preservatives
  • Most low-viscosity water or solvent based coatings.
  • Suitable for smooth coatings only

PERFORMANCE

Flow               2.16 ltr/min

Max tip           0.023”

MWP             227 bar | 3300 psi

SPECIFICATION

Motor             820 watt PMDC

Weight           14.5 kg

SUPPLIED COMPLETE WITH

  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 1/4” x 15m textile braided hose assembly

PRODUCT CODES

110 volt         599-850

240 volt         599-810

THE TRITECH WARRANTY

Motor & Drivetrain Lifetime Warranty

The motor, motor brushes and drive train are warranted to the original purchaser only under normal use and service against defects in craftsman-ship or material for the lifetime of the product.

Wearing Parts Two Year Warranty

Should the packings, piston or prime valve need replacing within two years of the original purchase this will be carried out by an approved service agent at no cost to the purchaser; this is a one-time only change within the warranty period.

Craftsmanship Four Year Warranty

Outside of what is listed above TriTech airless sprayers are warranted under normal use and service against manufacturing defects for four years from the date of original purchase.

https://www.aristospray.com/wp-content/uploads/2018/08/TriTech-T4-683x1024.jpg https://www.aristospray.com/wp-content/uploads/2018/08/TriTech-T4.pdf

A superb mid-range all rounder

USE TO SPRAY

  • Emulsion, interior and exterior
  • Top coats
  • Wood preservatives
  • Most medium-viscosity water or solvent based coatings.
  • Suitable for smooth coatings only

PERFORMANCE

Flow               2.54 ltr/min

Max tip           0.025”

MWP             227 bar | 3300 psi

SPECIFICATION

Motor             970 watt PMDC

Weight         19.1 kg | Carry   32.7 kg | Cart

SUPPLIED COMPLETE WITH

  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 1/4” x 15m textile braided hose assembly

PRODUCT CODES

Carry

110 volt         600-850

240 volt         600-810

Cart

110 volt         600-851

240 volt         600-814

THE TRITECH WARRANTY

Motor & Drivetrain Lifetime Warranty

The motor, motor brushes and drive train are warranted to the original purchaser only under normal use and service against defects in craftsman-ship or material for the lifetime of the product.

Wearing Parts Two Year Warranty

Should the packings, piston or prime valve need replacing within two years of the original purchase this will be carried out by an approved service agent at no cost to the purchaser; this is a one-time only change within the warranty period.

Craftsmanship Four Year Warranty

Outside of what is listed above TriTech airless sprayers are warranted under normal use and service against manufacturing defects for four years from the date of original purchase.

https://www.aristospray.com/wp-content/uploads/2018/08/TriTech-T5-Carry-682x1024.jpg https://www.aristospray.com/wp-content/uploads/2018/08/TriTech-T5.pdf

The airless sprayer for the professional

USE TO SPRAY

  • Emulsion, interior and exterior
  • Top coats
  • Wood preservatives
  • Most medium-viscosity water or solvent based coatings.
  • Suitable for smooth coatings only

PERFORMANCE

Flow               2.91 ltr/min

Max tip           0.027”

MWP             227 bar | 3300 psi

SPECIFICATION

Motor             1195 watt PMDC

Weight         33.1 kg

SUPPLIED COMPLETE WITH

  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 1/4” x 15m textile braided hose assembly

PRODUCT CODES

110 volt         600-853

240 volt         600-844

THE TRITECH WARRANTY

Motor & Drivetrain Lifetime Warranty

The motor, motor brushes and drive train are warranted to the original purchaser only under normal use and service against defects in craftsman-ship or material for the lifetime of the product.

Wearing Parts Two Year Warranty

Should the packings, piston or prime valve need replacing within two years of the original purchase this will be carried out by an approved service agent at no cost to the purchaser; this is a one-time only change within the warranty period.

Craftsmanship Four Year Warranty

Outside of what is listed above TriTech airless sprayers are warranted under normal use and service against manufacturing defects for four years from the date of original purchase.

https://www.aristospray.com/wp-content/uploads/2018/08/TriTech-T7.jpg https://www.aristospray.com/wp-content/uploads/2018/08/TriTech-T7.pdf

A tough machine for tough coatings

USE TO SPRAY

  • Emulsion, interior and exterior
  • Top coats
  • Intumescents
  • Most high-viscosity water or solvent based coatings.
  • Suitable for smooth coatings only

PERFORMANCE

Flow               4.00 ltr/min

Max tip           0.031”

MWP             227 bar | 3300 psi

SPECIFICATION

Motor             1565 watt PMDC

Weight         44.0 kg

SUPPLIED COMPLETE WITH

  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 1/4” x 15m textile braided hose assembly

PRODUCT CODES

110 volt         602-853

THE TRITECH WARRANTY

Motor & Drivetrain Lifetime Warranty

The motor, motor brushes and drive train are warranted to the original purchaser only under normal use and service against defects in craftsman-ship or material for the lifetime of the product.

Wearing Parts Two Year Warranty

Should the packings, piston or prime valve need replacing within two years of the original purchase this will be carried out by an approved service agent at no cost to the purchaser; this is a one-time only change within the warranty period.

Craftsmanship Four Year Warranty

Outside of what is listed above TriTech airless sprayers are warranted under normal use and service against manufacturing defects for four years from the date of original purchase.

https://www.aristospray.com/wp-content/uploads/2018/08/TriTech-T9-683x1024.jpg https://www.aristospray.com/wp-content/uploads/2018/08/TriTech-T9.pdf

Superb entry level machine for the professional

Supplied complete with:

  • TriTech T360 airless gun
  • TriTech Contractor 517 tip
  • 7.5m textile braided airless spray hose assembly

For two years from date of

purchase the QP019 is warranted under normal use and service against all manufacturing defects. The replacement of all wearing parts including the packings, prime valve and piston due to normal in-service wear and tear is not covered by this warranty. Where servicing has not been carried out at the recommended intervals this could invalidate the warranty.

Use to spray

  • Emulsion, interior and exterior
  • Top coats
  • Wood preservatives and most other low viscosity water or solvent
    based coatings.

Exterior masonry coatings and some interior emulsions may need thinning in line with recommendations.

Suitable for smooth coatings only.

https://www.aristospray.com/wp-content/uploads/2018/05/qlogo.jpg

Ideal for all the trim

USE TO SPRAY

  • Gloss and wood primers
  • Cellulose coatings
  • Solvent based top coats
  • Wood preservatives and other coatings with a good ‘flow’
  • Not suited for use with emulsions

PERFORMANCE

Airflow           96 cfm

MWP             0.41 bar | 6.0 psi

SPECIFICATION

Motor            1800 watt

Weight           8.5 kg

SUPPLIED COMPLETE WITH

  • 6.0m hose assembly
  • QTech Silver Pro HVLP gun

PRODUCT CODES

110 volt         773110

240 volt         773240

WARRANTY

For two years from date of purchase the QT3 HVLP is warranted under normal use and service against all manufacturing defects. The replacement of all wearing parts including the packings, prime valve and piston due to normal in-service wear and tear is not covered by this warranty. Where servicing has not been carried out at the recommended intervals this could invalidate the warranty.

https://www.aristospray.com/wp-content/uploads/2018/05/qt3.jpg https://www.aristospray.com/wp-content/uploads/2018/05/QTech-QT3-HVLP-1.pdf

Sprays most coatings, including intumescents

USE TO SPRAY

  • Emulsion, interior and exterior
  • Top coats
  • Majority of high viscosity water or solvent based coatings up to 70% approx solids including intumescents
  • Suitable for smooth coatings only

PERFORMANCE

Flow               6.5 ltr/min

Max tip           0.037”

MWP              227 bar | 3300 psi

SPECIFICATION

Motor            1800 watt DC brushless

Weight           61.0 kg

SUPPLIED COMPLETE WITH

  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 3/8” x 15m textile braided hose assembly
  • 1/4” x 1m textile braided whip hose

PRODUCT CODES

110 volt         QP036-110

240 volt         QP036-220

WARRANTY

For two years from date of purchase the QP036 is warranted under normal use and service against all manufacturing defects. The replacement of all wearing parts including the packings, prime valve and piston due to normal in-service wear and tear is not covered by this warranty. Where servicing has not been carried out at the recommended intervals this could invalidate the warranty.

https://www.aristospray.com/wp-content/uploads/2018/05/qp036.jpg https://www.aristospray.com/wp-content/uploads/2018/05/QTech-QP036-2.pdf

High output for contract work

USE TO SPRAY

  • Emulsion, interior and exterior
  • Top coats
  • Majority of high viscosity water or solvent based coatings up to 70% approx solids including intumescents
  • Suitable for smooth coatings only

PERFORMANCE

Flow               5.5 ltr/min

Max tip           0.031”

MWP              227 bar | 3300 psi

SPECIFICATION

Motor            1500 watt DC brushless

Weight           59.0 kg

SUPPLIED COMPLETE WITH

  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 3/8” x 15m textile braided hose assembly
  • 1/4” x 1m textile braided whip hose

PRODUCT CODES

110 volt         QP031-110

240 volt         QP031-220

WARRANTY

For two years from date of purchase the QP031 is warranted under normal use and service against all manufacturing defects. The replacement of all wearing parts including the packings, prime valve and piston due to normal in-service wear and tear is not covered by this warranty. Where servicing has not been carried out at the recommended intervals this could invalidate the warranty.

https://www.aristospray.com/wp-content/uploads/2018/05/qp031.jpg https://www.aristospray.com/wp-content/uploads/2018/05/QTech-QP031-1.pdf

Use it all day, every day

USE TO SPRAY

  • Emulsion, interior and exterior
  • Top coats
  • Wood preservatives
  • Most other low-medium viscosity water or solvent based coatings.
  • Suitable for smooth coatings only

PERFORMANCE

Flow               2.9 ltr/min

Max tip           0.027”

MWP              207 bar | 3000 psi

SPECIFICATION

Motor            1300 watt

Weight           33.0 kg

SUPPLIED COMPLETE WITH

  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 1/4” x 15m textile braided hose assembly

PRODUCT CODES

110 volt         QP025-110

240 volt         QP025-220

WARRANTY

For two years from date of purchase the QP025 is warranted under normal use and service against all manufacturing defects. The replacement of all wearing parts including the packings, prime valve and piston due to normal in-service wear and tear is not covered by this warranty. Where servicing has not been carried out at the recommended intervals this could invalidate the warranty.

https://www.aristospray.com/wp-content/uploads/2018/05/qp025.jpg https://www.aristospray.com/wp-content/uploads/2018/05/QTech-QP025-1.pdf

Professionally efficient - and affordable

USE TO SPRAY

  • Emulsion, interior and exterior
  • Top coats
  • Wood preservatives
  • Most other low-viscosity water or solvent based coatings.
  • Suitable for smooth coatings only

PERFORMANCE

Flow               1.9 ltr/min

Max tip           0.021”

MWP              207 bar | 3000 psi

SPECIFICATION

Motor             700 watt

Weight           11.4 kg

SUPPLIED COMPLETE WITH

  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 1/4” x 7.5m textile braided hose assembly

PRODUCT CODES

110 volt         QP019-110

240 volt         QP019-220

WARRANTY

For two years from date of purchase the QP019 is warranted under normal use and service against all manufacturing defects. The replacement of all wearing parts including the packings, prime valve and piston due to normal in-service wear and tear is not covered by this warranty. Where servicing has not been carried out at the recommended intervals this could invalidate the warranty.

https://www.aristospray.com/wp-content/uploads/2018/05/qp019.jpg https://www.aristospray.com/wp-content/uploads/2018/05/QTech-QP019-1.pdf

I reckon I should get a sprayer. Tell me, which one would be best for the work I do?

1

What paint will you be using?

2

How many times a week will the sprayer be used?